Job stories

Fire protection projects in CalgaryThe problem, what we did, how it ended.

These are real jobs from Calgary kitchens: a cheap suppression install that the Calgary Fire Department shut down, two system replacements finished in a single day, and a system with parts from two brands that couldn't pass inspection. Each one is the problem, what we did and the result.

Recent installs around Calgary

Retractable paint booth with dry chemical fire suppression cylinders installed by Defense Fire ProtectionDefense Fire Protection technicians testing an Autocall fire alarm panel in our Calgary shopBuckeye BFR-9 kitchen fire suppression system installed in a Calgary food truck by Defense Fire ProtectionAmerex KP wet chemical cylinder and mechanical release module installed by Defense Fire ProtectionFire pump room with sprinkler riser piping and control valves in a Calgary buildingBadger Range Guard fire suppression system installed in a Calgary food truck by Defense Fire Protection

Recent kitchen suppression jobs

Most of our project work is kitchen hood suppression: new installs, inspections and replacing systems that can't be saved.

January 9, 2026 · Kitchen suppression replacement

Cheap fire suppression install goes wrong: Defense Fire steps in

The problem: a low-cost kitchen suppression install left the restaurant with 8 deficiencies, and the Calgary Fire Department shut it down.

What we did: we replaced the ANSUL system with a Buckeye Kitchen Mister.

The result: a Buckeye Kitchen Mister in place of the system the fire department shut down, installed by a company that services that brand.

Why do some systems get replaced instead of repaired? See the brands we service.

April 28, 2026 · Two system replacements

4 techs, 3 electricians, 2 system replacements, 1 day

The problem: two kitchen suppression systems needed replacing.

What we did: four of our technicians and three electricians replaced both systems together.

The result: both systems replaced in one day.

The electrical side of an install (shutting down outlets and make-up air, the local bell) is coordinated with the electrician. See kitchen hood suppression.

A problem we find regularly · Mixed brands

A Kidde part on a Badger system

The problem: a kitchen suppression system “repaired” with whatever part was on the truck, like a Kidde cylinder on a Badger control head or a hardware-store flex hose on the discharge piping. It looks complete, but it's no longer a listed system, so it fails inspection.

What we do: replace the mismatched parts with the correct brand's listed parts, or replace the system. Badger's own Product Bulletin 439-0906 says not to substitute other brands' parts, and Kidde's technical support told us older cylinders aren't cross-listed with the newer Badger UCH control head.

The result: one brand, listed parts, and a system that can be tagged.

Read why you can't mix suppression brands →

Does your system look like one of these?

If your inspection report mentions mixed components, unlisted parts or a shutdown, start with a photo of the cylinder, control head and your last tag. We'll tell you whether it can be repaired or needs replacing, and what each costs. You can also check your own kitchen with our restaurant fire inspection checklist.

Have a problem system? Send us photos

Attach photos of the system, the tag or your inspection report. A real person replies within one business day, usually the same day.

  • Written quote before any work
  • Photos of every deficiency
  • We book your next inspection and remind you

Call (403) 807-5822 or get a price range in 60 seconds →

We'll text and email you about this request (msg & data rates may apply; reply STOP to opt out). We never share your details. Privacy policy