Emergency lights & exit signs

Emergency lighting inspection in CalgaryLights that stay on when the power doesn't.

Emergency lights and exit signs in Calgary buildings need a monthly check by the owner or staff and a yearly test by a technician. The yearly test confirms each battery holds the light for the full required duration. Defense Fire Protection does that test, usually on the same visit as your annual fire alarm inspection, and replaces failed battery packs, heads and exit signs while we're there.

  • Monthly check you can do yourself, explained below
  • Yearly duration test by a technician
  • Failed packs, heads and exit signs replaced on the spot
4.9 on Google24/7 emergency serviceEst. 2022 · 40+ yrs combined experienceBrands we sell & service
  • Kidde
  • Badger
  • Amerex
  • Buckeye
  • ProTex II
  • CaptiveAire
  • Autocall
NFPA 96 · NFPA 17A · NFPA 10 · CAN/ULC-S536

How often do emergency lights need testing in Calgary?

Every month by you, and once a year by a technician. The monthly check confirms each light and exit sign comes on; the yearly test confirms the battery keeps it lit for the full required duration.

The two checks catch different problems. A unit can pass the monthly check, lighting up fine when you press the test button, and still fail the yearly test because its battery fades well before the time is up. That second failure is the one that matters in a real power cut, when people are finding their way out of a dark building.

Our service schedule lists the yearly test as a 30-minute duration test. Your occupancy and the Calgary Fire Department can change the requirement, so we confirm what applies to your building on the first visit. See the full inspection interval table for every system.

Your monthly check, step by step

  • Walk every hallway, stairwell and exit route.
  • Press the test button on each emergency light and exit sign, or use the building's test switch if it has one.
  • Confirm every head and sign lights up.
  • Write the date, your initials and any unit that didn't light in a log.
  • Send us the list of failed units so they're replaced before the yearly test.
Defense Fire Protection technicians building an Autocall 4010ES fire alarm panelDefense Fire Protection service van in Calgary

What happens at the yearly emergency lighting test?

A technician runs the emergency lights and exit signs on battery power and checks that every one stays lit for the full required duration, then fixes the ones that don't.

  1. Book around your building

    Send the address and, if you have them, last year's report and your monthly log. We book around your tenants and hours.

  2. Run them on battery

    Each emergency light and exit sign is tested to confirm its battery holds the light for the full duration, not just that it switches on.

  3. Replace what failed

    Failed battery packs, heads and exit signs are replaced on the same visit, so you aren't waiting on a second trip.

  4. Set up next year

    Tell us the date and we'll remind you a month before the next test is due.

What usually fails on an emergency light?

The battery pack is the part that wears out. A unit that lights when you press the button can still fail the duration test because its battery can no longer last the full time.

When a unit fails, we replace what's needed: the battery pack, the heads (the lamps on an emergency light) or the whole exit sign. All of it can be done on the same visit as the test.

Already have a list of failed units? Send it, or a photo of the deficiency page from your last report, through the form below and we'll quote the replacements.

Defense Fire Protection technicians testing an Autocall fire alarm panel in our Calgary shop

Can emergency lighting be tested with the fire alarm inspection?

Yes, and that's usually how it's done. One visit covers the yearly emergency lighting test and the annual fire alarm inspection to CAN/ULC-S536.

Booking both together means one service call, one set of paperwork and one date to remember. The fire alarm inspection covers the detectors, pull stations, horns, strobes and panel; the emergency lighting test covers the lights and exit signs that guide people out when the alarm sounds.

If the alarm test turns up deficiencies, we quote them in writing. Read how deficiency reporting to the Calgary Fire Department works so nothing sits unfixed. For everything else in the building, see all alarm and emergency lighting services.

Emergency lighting FAQ (Calgary)

How often do emergency lights and exit signs need testing?

Monthly by the owner or staff, and yearly by a technician. The monthly check confirms they light; the yearly test confirms the batteries hold for the full required duration.

Can I do the monthly emergency light check myself?

Yes. The monthly check is the owner's: press the test button on each unit, confirm it lights, and log the date and any failures. The yearly duration test is done by a technician.

My emergency light comes on when I test it. Why did it fail the yearly test?

Because its battery didn't last the full duration. Lighting up for a few seconds only proves the bulb and switch work; the yearly test proves the battery can keep it lit long enough to get people out.

Do you replace failed emergency lights and exit signs?

Yes, on the same visit. We replace failed battery packs, heads and exit signs while we're on site for the test.

Can you test emergency lights at the same time as the fire alarm?

Yes. Most buildings book the yearly emergency lighting test with the annual CAN/ULC-S536 fire alarm inspection, so it's one visit and one set of reports.

More answers in the fire alarm and emergency lighting FAQ.

Never miss an inspection date

Tell us when your tag expires. We'll remind you a month before, so the fire inspector is never the one who tells you.

Book your emergency lighting test

Send the address and your last report or monthly log if you have one. A real person replies within one business day, usually the same day.

  • Written quote before any work
  • Photos of every deficiency
  • We book your next inspection and remind you

Call (403) 807-5822 or get a price range in 60 seconds →

We'll text and email you about this request (msg & data rates may apply; reply STOP to opt out). We never share your details. Privacy policy