Kitchen suppressionMoved your fryer? Your fire suppression system might not cover it anymore

The short answer

Maybe not. Suppression nozzles are aimed at the exact appliances and positions in your system’s design, so a moved or swapped appliance can end up unprotected. In Alberta, a certified technician can rearrange appliances following the manufacturer’s manual, but adding an appliance or changing its type is a design change that may need permits.

Fire suppression detection line and nozzles inside a restaurant exhaust hood plenum

Restaurants change their lines all the time: a new menu, a bigger fryer, a griddle moved to make room. But your kitchen hood fire suppression nozzles were placed for the exact appliances and positions in the original design. Move things around, and the nozzles may now be spraying an empty spot.

Why does moving an appliance affect suppression coverage?

Because each nozzle is listed for a specific appliance type, size and aiming point. A nozzle aimed at the centre of a fryer vat won’t protect a char broiler that’s been slid into its place. Some systems have “overlapping” appliance protection, which allows appliances to move within a defined zone. Others don’t, and the manual decides which applies.

What does Alberta allow when you change your cook line?

Rearranging is fine with a certified technician; adding or changing appliances is a design change. Alberta’s commercial kitchen interpretation (STANDATA 23-FCI-004) says rearranging appliances can be handled by a certified technician without new engineering, as long as no new appliances are added in number or type and the work follows the manufacturer’s manual. Add an appliance, change its type, or change gas or electrical supply, and you’re into a design change, permits, and possibly a professional review if the fire alarm connection changes.

Used equipment has its own rule: a used hood or suppression system brought into a new location must be certified to UL 300 or ULC/ORD-C1254.6, or it isn’t acceptable.

What this means for you: before you move, swap or add anything under the hood, call your suppression company. A quick check of the nozzle layout costs far less than a failed inspection, or a fire on an unprotected appliance. Use the price estimator for a range on nozzle changes or a new system.

Kitchen fire suppression nozzles aimed at the cooking appliances under a restaurant hood

Quick answers

Can I move my fryer under the hood?

Only if the suppression nozzles still cover it according to the manufacturer’s manual. Have a certified technician check, and adjust the nozzles if needed.

Do I need a permit to add a new appliance under my hood?

Usually yes. Adding appliances changes the system design, and gas or electrical changes need permits.

Sources

  • Alberta STANDATA 23-FCI-004 / 23-BCI-009 (December 2024)
  • NFPA 17A, Standard for Wet Chemical Extinguishing Systems
  • NFPA 96, Ventilation Control and Fire Protection of Commercial Cooking Operations
  • Manufacturer DIOM manuals

This article is general information, not a code ruling: your local fire department has the final say.

Moving or adding equipment under the hood?

Tell us what’s changing. We’ll check the nozzle coverage and tell you if a permit is needed.

  • Written quote before any work
  • Photos of every deficiency
  • We book your next inspection and remind you

Call (403) 807-5822 or get a price range in 60 seconds →

We'll text and email you about this request (msg & data rates may apply; reply STOP to opt out). We never share your details. Privacy policy